Eppendorf ThermoTop - Manual (Page 3)

3
Operating instructions
Eppendorf ThermoTop ®
English (EN)
1 Operating instructions
1.1 Using this manual
These instructions for use are a supplement to the operating manual of the
ThermoMixer C, ThermoMixer F0.5/F1.5/F2.0/FP and ThermoStat C devices. These
instructions for use do not replace the operating manual.
Read the operating manual of the corresponding device before using the ThermoTop for
the first time. The current version of the operating manual can be found in the Internet at
www.eppendorf.com.
2 Product description
2.1 Features
The condens.protect technology available in the ThermoTop prevents the formation of
condensation on the inner wall or the lid of the tube during the temperature control of
samples.
The ThermoTop is compatible with the ThermoMixer C, ThermoStat C, and
ThermoMixer F0.5/F1.5/F2.0/FP devices. In conjunction with the ThermoMixer C and
ThermoStat C, the ThermoTop can be used with thermoblocks for plates and lab tubes up
to a volume of 2 mL. The compatible thermoblocks feature a condens.protect symbol:
.
3 Safety
3.1 Intended use
The ThermoTop is designed to prevent the formation of condensation on the inner wall or
the lid of the tube during the temperature control of samples. The ThermoTop must only
be operated by qualified personnel.
The ThermoTop is intended exclusively for indoor use. All country-specific safety
requirements for operating electrical equipment in the laboratory must be observed.
3.2 Warning signs on the device
Depiction Meaning Location
Risk of burns from hot
surfaces. Interior of the ThermoTop