Eppendorf Temperature sensor for the 384well block - Manual (Page 14)

26
Sensor: Temperature sensor for the 384well block
The operating conditions and the storage and transport conditions are included in the operating
manual of the temperature validation system.
The temperature sensor is adjusted. In order to guarantee that the measurement is in
compliance with international standards (NIST, PTB), the temperature sensor must be calibrated
with the supplied measuring device.
Description Order no.
Temperature sensor for the 384well block,
incl. personal card, silicone mat, spacers,
and operating manual 5331 233.007
Temperature validation system
for Mastercycler, Mastercycler ep and Mastercycler pro 0055 000.298
Personal card for the temperature validation system (384) 5331 235.000
Silicone mat 5331 234.003
Spacers for 384well block (set of 4) 5331 872.000
Operating manual 5331 232.140
8 Technical data
9 Ordering information
8 Technical data / 9 Ordering information
Technical data / Ordering information
8/9
384Block_en.fm Seite 26 Dienstag, 30. September 2008 10:45 10