Eppendorf MiniSpin plus - Manual (Page 15)

27
Power supply: 230 V / 50 – 60 Hz
120 V / 50 – 60 Hz
see identification plate on bottom
of centrifuge
Power requirement:
MiniSpin plus
85 W
MiniSpin 70 W
Max. speed:
MiniSpin plus
14,500 rpm
MiniSpin 13,400 rpm
Max. centrifugal force:
MiniSpin plus
14,000 rcf
MiniSpin 12,100 rcf
Max. load: 12 x 2.0 ml Safe-Lock tubes
Max. kinetic energy:
MiniSpin plus
852 Nm
MiniSpin 728 Nm
Max. permitted density
of material to be centrifuged:
1.2 g/ml
Ambient temperature: 10 – 40 °C
Max. relative humidity: 75 %, no condensing moisture
Degree of pollution: 2
Overvoltage category: ΙΙ
Acceleration time to max. speed: 13 seconds
Braking time from max. speed; 12 seconds
Dimensions: Height: 120 mm
Depth: 240 mm
Width: 225 mm
Weight: 3.7 kg (without rotor)
Fuses
(not accessible from outside;
230 V: 1.6 A, slow-acting
to be changed by Service only): 120 V: 3.16 A, slow-acting (UL-approved)
Technical specifications subject to change!
6 Technical data
Technical data
6
02B_MiniSpin_en.fm Seite 27 Montag, 3. November 2008 10:41 10