Dimensions & specifications, Canada – Bunn BREWWISE DUAL TF DBC User Manual
Page 2
BUNN
®
practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in inches.
Bunn Corporation owns all copyrights relating to materials in this publication. Please contact Bunn Corporation to request permission to reproduce any portion of this publication.
Dimensions & Specifications
Bunn-O-Matic Corporation of Canada - 280 Industrial Pkwy. S. Aurora, Ontario L4G 3T9 • 905-841-2866 • Fax 905-841-2775 • www.bunn.com
CANADA
Model
Product #
Volts Amps Tank Htr Total
Capacity
Cubic
Weight Funnel
Watts
Watts
per hr.
Ft
3/
m
3
lbs / kg Locks
Dual TF DBC 34600.6000 120/240 27.5 2@3300 6600 18.9 gal / 71.6 liter 14.6 /.39 92.5 /41.9 Yes
Dual TF DBC* 34600.6001 120/240 27.5 2@3300 6600 18.9 gal / 71.6 liter 14.6 /.39 92.5 /41.9 Yes
Dual TF DBC 34600.6002 120/240 27.5 2@3300 6600 18.9 gal / 71.6 liter 14.6 /.39 92.5 /41.9
No
Dual TF DBC* 34600.6003 120/240 27.5 2@3300 6600 18.9 gal / 71.6 liter 14.6 /.39 92.5 /41.9
No
Dual TF DBC 34600.6004 120/208 27.4 2@2850 5700 16.3 gal / 61.8 liter 14.6 /.39 92.5 /41.9
No
Dual TF DBC* 34600.6005 120/208 27.4 2@2850 5700 16.3 gal / 61.8 liter 14.6 /.39 92.5 /41.9
No
Dual TF DBC 34600.6006 120/208 27.4 2@2850 5700 16.3 gal / 61.8 liter 14.6 /.39 92.5 /41.9 Yes
Dual TF DBC* 34600.6007 120/208 27.4 2@2850 5700 16.3 gal / 61.8 liter 14.6 /.39 92.5 /41.9 Yes
* Models have black decor.
Brewing capacity: based upon incoming water temp of 60ºF (140ºF rise).
Models listed as 120/208V or 120/240V must be connected to 208V or 240V electrical service respectively. Please refer to the installation manual.
Electrical: Brewer is 3-wires plus ground service rated 120/208V or 120/240V, single phase, 60Hz. ( No Cord Set )
Grinder is 2-wires plus ground service rated 120V, 60Hz, circuit required,
3
⁄
4
HP motor. ( Cord Set Attached)
Plumbing: 20-90 psi (138-621 kPa). Machine supplied with
3
⁄
8
" (9.25 mm) male fitting.