Behringer ULTRAGAIN PRO-8 DIGITAL ADA8000 - Manual (Page 6)

6 ULTRAGAIN PRO-8 DIGITAL ADA8000 User Manual
output
For unbalanced use, pin 1 and pin 3
have to be bridged
1 = ground/shield
2 = hot (+ve)
3 = cold (-ve)
input
1 2
3
1 2
3
Balanced use with XLR connectors
Fig. 4.1: XLR connectors
strain relief clamp
sleeve
tip
sleeve
(ground/shield)
Unbalanced ¼" TS connector
tip
(signal)
Fig. 4.2: ¼" TS connector
strain relief clamp
sleeve
ring
tip
sleeve
ground/shield
For connection of balanced and unbalanced plugs,
ring and sleeve have to be bridged at the stereo plug.
Balanced ¼" TRS connector
ring
cold (-ve)
tip
hot (+ve)
Fig. 4.3: ¼" TRS connector
Device A
optical in/output
ADA8000
optical in/output
signal flow
Fig. 4.4: Connecting the ADA8000 optically via Toslink
Wordclock output
device A
Wordclock input
ADA8000
signal flow
terminating
resistor
Fig. 4.5: Unbalanced connection (termination) of the ADA8000’s wordclock input