Scarlett SC-082 - Manual (Page 4)

www.scarlett-europe.com SC-082 4
GB INSTRUCTION MANUAL
IMPORTANT SAFEGUARDS
· When using this appliance, basic precautions should always be followed:
· Read this instruction manual carefully to prevent any unit damage or injure when using.
· Before the first connecting of the appliance check that the voltage indicated on the rating
label corresponds the mains voltage in your home.
· For home use only. Do not use for industrial purposes.
· To reduce the risk of electric shock, do not use outdoors or on wet surfaces. Do not immerse
unit or cord in any liquids.
· Do not handle the plug by wet hands. Never switch off the appliance by pulling the cord.
· Do not let the cord hang over sharp edges or touch hot surfaces.
· Always unplug the appliance from the power supply, when not in use and before servicing.
· Do not use broken appliance or with damaged cord. Do not make attempts to repair the
appliance, adjust or replace parts in the vacuum cleaner. When malfunction happen, contact
the authorized service center for examination, repair, electrical or mechanical adjustment.
· To avoid deforming of the plastic components of the appliance or fire accident, never put the
appliance directly in sun shine or near any heater or the like.
· Keep away from children.
· To avoid damage of the flexible hose, do not fold or pull it strongly.
· Do not put any object into inlets. Do not use with inlet blocked. Keep free of dust, hair and
anything that may reduce airflow.
· Be careful, when cleaning on stairs.
· Before you start using the vacuum cleaner, please remove all burning, large or sharp objects
from the floor in order to prevent the damage of the filter.
CAUTION
· To avoid voltage overload do not plug the unit and other powerful electrical appliances to the
power supply at the same time.
· Never use the vacuum cleaner without the filters.
· Do not use the appliance on wet surfaces. This unit does not absorb the water.
· If you have cleaned the carpet with liquid detergent, let the carpet dry up completely before
vacuuming it.
· Never use the appliance without dust bag. Replace the dust bag without delay if it is
damaged.
VACUUM CLEANER ASSEMBLING
· Insert the flexible hose into the air inlet and press until it clicks into proper position.
· To remove the hose, press the button on hose base, then pull to remove it from the
attachment point.
· Extend the telescopic tube to the desired length.
· Insert a hose into tube.
· Attach a nozzle to the tube:
Floor brush is intended for cleaning bare floor and floor coverings.
Crevice/Furniture nozzle is for cleaning sofa, curtain or dust on the decorating surfaces,
corners and between cushions.
INSTRUCTION FOR USE
· Before starting, unwind the cord to sufficient length and insert the plug into the power supply.
The yellow mark on the cord shows optimal cord length. Do not unwind the cord beyond the
red mark.
· Press On/Off button to switch the unit on and press again to stop it.
· You can adjust the air flow using the air flow regulator on the flexible hose handle:
Decrease flow for cleaning curtains, books, furniture, etc.
Increase flow for cleaning bare floor.
· You can adjust the vacuum cleaner power using the power control on body.
· To prevent motor overheating do not work continuously longer than 30 minutes and
obligatory stop vacuum cleaner for no less than 15 min.