beautypg.com

Scope of delivery, Placing the device in operation, Radio mode – Blaupunkt NEW YORK 800 User Manual

Page 6

background image

6

Scope of delivery

The scope of delivery includes:

New York 800

Remote control (incl. battery)

TMC Tuner (for 1 011 103 800/802/810/812 only)

MicroSD card with navigation data in the MicroSD
card slot (only for devices with navigation)

GPS antenna (for 1 011 103 800/802/810/812 only)

External Bluetooth microphone

Getting started

Support frame

Small parts set

Installation material

Connecting cable

Placing the device in operation

Caution!

Transport securing screws

Ensure that the transport securing screws are removed
before the startup of the device.

Switching on/off

Switching on/off with the rotary/pushbutton

u For switch-on, press the rotary/pushbutton

5

.

u For switch-off , hold the rotary/pushbutton

5

pressed for more than 2 seconds.

Switching on/off via vehicle ignition
If the car sound system is connected with the vehicle
ignition and it was switched off with the rotary/pushbut-
ton

5

, it is switched on or off with the ignition.

Volume

Adjusting the volume
You can adjust the volume in steps from 0 (off ) to 50
(maximum).

u Turn the rotary/pushbutton

5

to change the vol-

ume.

Muting the car sound system (Mute)

u Briefl y press the rotary/pushbutton

5

to mute the

device or to reactivate the previous volume.

Main menu

In the main menu, you press the buttons on the touch-
screen to call up the diff erent sources and operating
modes.

u Press the MENU button

2

.

The main menu is displayed.

As long as you do not select a new audio source, the
last active audio source is played back.

Note:
The fi gures used in these instructions are intended
to facilitate the explanations and details may deviate
from your device.

Radio mode

Start radio mode

u In the main menu, press the Radio button.

The radio menu is displayed.

Select memory bank

Diff erent memory banks and wavebands are available.
Up to 6 stations can be stored in each memory bank.

u Press the [ ] button repeatedly until the desired

memory bank is displayed.

Tuning into a station

Tuning into stations manually

u Briefl y press the [ ] or [ ] button once or sev-

eral times to change the frequency in increments.

Scope of delivery | Startup | Radio mode