Blaupunkt MIAMI 7 643 810 310 - Manual (Page 16)

45
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
The memory banks are accessed in the
following order: FM1, FM2, FM3 and
FMT.
Tuning into a station
There are various ways of tuning into a
station.
Automatic seek tuning
➮
Move the joystick
7
down or up.
The unit tunes into the next receivable
station.
Tuning into stations manually
You can also tune into stations manual-
ly.
➮
Move the joystick
7
left or right.
Note:
You can only tune into stations manual-
ly if the RDS function is deactivated.
Browsing through broadcasting
networks (only FM)
If a radio station provides several pro-
grammes, you have the option of brows-
ing through its “broadcasting network”.
➮
Move the joystick
7
left or right.
Note:
The RDS function must be activated
before you can use this feature.
When using this feature, you will only
be able to switch to stations that you
have received once already.
Setting the sensitivity of station
seek tuning
You can choose whether to only tune
into stations with a strong reception or
to also tune into those with a weak re-
ception.
➮
press the TUNER button
<
in ra-
dio mode.
The radio functions menu appears in the
display.
➮
Press the NEXT button
3
.
➮
Press the softkey
4
assigned to
the “SENS” display item.
The display shows the currently set sen-
sitivity level. “SENS 6” is the highest
sensitivity setting and means the tuner
can receive distant stations. “SENS 1”
is the lowest setting.
➮
Move the joystick
7
up/right or
down/left to adjust the sensitivity.
➮
Press the joystick OK
7
or the
MENU button
8
to close the
menu.
The settings are saved.
Storing stations
Storing stations manually
➮
Select the required FM memory
bank, i.e. FM1, FM2, FM3, FMT, or
one of the MW or LW wavebands.
➮
Tune into the required station as
described in the section entitled
“Tuning into a station”.
➮
Press one of the six softkeys for
longer than two seconds to store
the station to that softkey.
RADIO MODE