Step 4: basic network setup – Spyclops SPY-DVR4960 Quick Start User Manual
Page 3

Step 4: Basic Network Setup
To generate the Esee ID the DVR must be connected to the network through an Ethernet cable.
Setup
System setup –
Network setup.
Check the DHCP box to dynamically assign an IP through the
router and click the Esee box to populate the Esee ID.
Ok.
It may take up to 10 minutes for the Esee number to
populate.
“Configuration changed! To save the latest configuration?” Click “Yes” to save your settings.
Step 5: Access the DVR from a browser connected to the same network
Setup
System setup –
Network setup -- make note of your
DVR IP address and Esee number.
In a web browser in the same network, enter the IP address
you just took note of from the DVR.
Accept the pop up and install Active X controls.
Enter the username and password for the DVR in the log in
screen and select the log in button.