Lukas HTS 90 User Manual
Page 5

7.3 Venting the Working tool
Use the pump to drive out the unloaded piston half way. The pump has to be placed higher
than the tool which has to be vented. Now open the drain valve of the pump for retracting the
piston by spring retraction.
The oil reservoir filler cap must be open. The retracting piston presses the air back into the oil
reservoir via the maximum-pressure-hose. The air escapes through the open fillercup.
10 Operating the Working tool
10.1 Door opener HTS 90
10.1.1Points of application:
Doors with single protection: locking furniture and hinge plates.
Doors with multiple protection: locking furniture, hinge plates and
at each locking bolt, if required.
10.2 Cutter set LSH - 3
10.2.1Cutting
The knives must be applied in a right angle to the object to be cut.
Actuate the pump lever til the work piece is cut through.
After the cutting performance open drain valve by
turning the lever to the left. The movable cutting
blade returns to its initial position.
10.3 Uncoupling pump and Working tool
Before uncoupling the pump from the Working tool, make sure
(by opening the drain valve) that there is no pressure and that the piston
is completely retracted.
10.4 Operating: Safety instructions
When operating rescue devices, wear
-
protective clothing helmet with visor or goggles protective gloves.
During operation of this rescue device, parts of the object worked on with this device may
break away and endanger people standing nearby. Onlookers must be kept at a safety
clearance of at least 5m.
Prior to using and after repair the pump must be deareated (see 9.1).
10.4.1
Door opener HTS 90
When applying the unit, the claws must be pressed or beaten into the door crack as hard and
deep as possible.
When working in an environment which involves the risk of explosions, sparks must be
avoided when the claws are pushed into the door gap!
Attention! There is the risk of sparks, if the device gets in contact with metal or stone!
The door opener must be held tight to prevent injuries by the falling device when the door
breaks open.
Attention! There is the danger of injuries in the area doors breaking open.