BenQ W9000 - Manual (Page 8)

8 Safety, regulatory and legal information
English
Safety instructions (continued)
12. Never attempt to replace the lamp assembly
until the projector has cooled down and is
unplugged from the power supply.
13. When you think service or repair is required,
take the projector only to a suitably qualified
technician.
14. Do not attempt to disassemble this projector.
There are dangerous high voltages inside
which may cause death if you should come
into contact with live parts. The only user
serviceable parts are the lamp, cable panel-
connector cover, and air filters which have
their own removable covers or access
panels. See pages
32 - 34 .
Under no circumstances should you ever
undo or remove any other covers. Refer
servicing only to suitably qualified
professional service personnel.
15. Do not store the projector on end vertically.
Doing so may cause the projector to fall over,
causing injury or resulting in damage.