Ruvati RVF4109CH - Manual (Page 4)

®
Installation
RVF4109CH
www.ruvati.com Printed in USA
1-855-4-RUVATI
Page 4
1. Place the new faucet in posi-
tion through the faucet hole
of the sink or countertop. A
standard 1-3/8” hole is required
for this faucet.
3. Attach the male ends of the
hot & cold water connection
hoses into the bottom of the
faucet body. Then connect the
female ends of the hoses to the
corrosponding hot & cold water
supply.
2. From under the sink, attach
the plastic rings onto the faucet
base, followed by the lock nut.
Then tighten the two screws on
the lock nut to secure the faucet
body in place.
®