Ruvati RVF1210ST - Manual (Page 6)

®
RVF1210ST
www.ruvati.com Printed in USA
1-855-4-RUVATI
Page 6
®
Figure 7
Figure 8
Figure 9
9. Then screw the remaining female
ends of the supply hoses to the
corresponding hot and cold water
supply valves using an adjustable
wrench or pliers (Figure 7).
10. Insert rubber gasket B into the
end of the faucet where the faucet
head is supposed to connect. Then
attach the faucet head by screwing
until tight(Figure 8).
11. Turn water supply back on (Fig-
ure 9). Test the flexible spray hose
by turning faucet on and off. Make
sure there is good water flow and no
leaks. If there is a leak, turn the water
supply off and contact Ruvati.