Stopping electric motor, Towing – MBW MM90 User Manual
Page 10
- 7 -
4.
Close the fuel valve.
Stopping Electric Motor
1.
Move mixer engagement lever to the “IDLE” position.
2.
Move the switch on the motor to the “OFF” position.
WARNING
Always STOP the engine before adding fuel.
Always STOP the engine or motor before leaving
the equipment unattended for any amount of time.
Always STOP the engine or motor and disconnect
spark plug wire or power cord before making any
repairs or adjustments to the machine.
Towing
1.
Stop the engine or electric motor.
2.
Close and latch the engine shroud.
3.
Rotate the drum into the locked position, and check
that it is locked in place.
4.
Secure the mixer hitch and safety chains to the vehi-
cle.
WARNING
Always check that axle, front leg, and tow bar
hardware is tight before towing.
Make sure safety bolt is in place.
Check the condition of the pin on the tow bar and
make sure it is secure.
Remove any loose debris from the mixer before
towing on roads.
Check that safety chains cross each other when
attached.
MAXIMUM TOW SPEED: 50 mph