Notice, Caution – Bissell 3950 User Manual
Page 9
Crevice Tool: Use in tight narrow spaces.
Extension Wand: Use with desired attachment for
a longer reach.
Curved Hose Wand: Use with desired attachment
for a longer reach or for cleaning hard to
reach places.
TurboBrush
®
: Use rotating brush action for small
areas such as stairs and upholstery.
NOTE: Press gently when using the
TurboBrush to maximize cleaning.
Too much pressure will cause the brush to
stop rotating.
Power cord usage
1.
To use your vacuum, remove the cord and
plug it into an electrical outlet. For your
convenience, there are two quick release
cord wraps for easy cord removal. There is
also a cord clip that is part of the upper cord
wrap where you can attach the cord when
vacuuming.
2.
When you are finished cleaning, turn
vacuum cleaner off.
3.
Unplug power cord by grasping the polarized
plug (NOT the cord) and disconnect from outlet.
4.
Loop power cord around cord wraps on rear
of vacuum cleaner. Be sure to first return the
quick release cord wraps back to their
original position before wrapping the cord.
5.
Clip molded plug to power cord to secure.
O
perations (continued)
9
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
NOTICE:
The Floor Brush will continue
to rotate while you use your
vacuum for above floor cleaning.
To prevent carpet damage, do
not lean on the vacuum or let the
Powerfoot tilt forward.
CAUTION:
The rotating floor brush
continues to rotate while
tools are in use. To reduce
the risk of injury from
moving parts, always
move the cleaner with the
carrying handle. Always
place vacuum cleaner
on the floor with handle
in upright position when
using tools. Never place
your fingers under the
cleaner when it is
running. Never place
powerfoot on furniture or
uneven surfaces. Do not
place vacuum cleaner
close enough to objects
to pull them into
rotating brush.
Tip:
Hair, string and small objects can block
the vacuum hose or tools. Check them
occasionally for obstructions.
Quick Release
Cord Wrap
ug603-2145_3950_806.indd 9
ug603-2145_3950_806.indd 9
9/19/06 12:31:53 PM
9/19/06 12:31:53 PM