Bissell Auto Care Proheat 1425 series - Manual (Page 9)

4.
Disconnect the cleaning tool from the Spray
Trigger by pushing down on button lock and pull-
ing straight off
(Do NOT twist tools to remove them)
5.
Once removed from the Spray Trigger, all tools
can be cleaned by rinsing under clean running
water. The TurboBrush tool’s switch must be in
“SUCTION” position before rinsing under clean
running water.
6.
Check Spray Nozzle for accumulated dirt or debris.
If necessary, clean with soft bristle brush.
1.
Wipe all surfaces with a soft cloth.
2.
Wrap Power Cord around the Cord Wrap on the
back of the Auto Care Proheat®.
3.
Wrap Vacuum Flex Hose around the base of the
unit and secure the Spray Trigger.
4.
Store unit in protected, dry area, at room
temperature (40º to 110ºF).
Note: Onboard storage for the TurboBrush
Tool has been provided on the back of the
unit. Attach the TurboBrush to the unit by
pressing it onto the holder firmly until the
button snaps into hole.
A
fter Cleaning (continued)
M
achine Storage
9
w w w . b i s s e l l . c a 1 - 8 0 0 - 2 6 3 - 2 5 3 5
WARNING:
Keep spray away from face.
failure to do so may result in
personal injury.