Blaupunkt BRIGHTON MP35 - Manual (Page 27)

53
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
Configuring the level
display
The level display temporarily provides
you with a symbolic representation of
the volume and audio settings whilst you
are adjusting them.
When you are not changing any set-
tings, the level display depicts the peak
music/speech output. You can switch
the level display on/off.
➮
Press the MENU button
8
.
“MENU” appears in the display.
➮
Press the or button
7
repeat-
edly until “PEAK LVL” appears in
the display.
➮
Press the or button
7
to
switch between “PEAK ON” and
“PEAK OFF”.
When you have finished adjusting the
setting,
➮
press the MENU button
8
twice.
External audio sources
Instead of connecting a CD changer,
you can connect another audio source
equipped with a line output. Audio sourc-
es can, for example, be portable CD
players, MiniDisc players or MP3 play-
ers.
If you want to connect an external au-
dio source, you will need an adapter
cable. You can obtain this cable (Blau-
punkt no.: 7 607 897 093) from your
authorised Blaupunkt dealer.
Note:
●
If no CD changer is connected, the
AUX input must be activated in the
menu.
Switching the AUX input on/off
➮
Press the MENU button
8
.
“MENU” appears in the display.
➮
Press the or button
7
repeat-
edly until “AUX OFF” or “AUX ON”
appears in the display.
➮
Press the or button
7
to
switch AUX on/off.
When you have finished adjusting the
setting,
➮
press the MENU button
8
.
Note:
●
If the AUX input is activated, you
can select it by pressing the SRC
button
2
. “AUX INPUT” then ap-
pears in the display.
LEVEL DISPLAY EXTERNAL AUDIO SOURCES