BUSH DAB+ CD Mico System with Universal Dock for iPod BMS05DABIP - Manual (Page 11)

BMS05DABIP
11
Repeat program play (remote control only)
You may use the program play and the repeat play features together to continuously repeat a
programmed playback. First program the desired playback sequence, then press the REPEAT
Button to select repeating the current track or the entire programmed sequence.
This unit allows you to play all your favorite songs from your iPod through the iPod dock.
1. To select iPod operation, press the iPod/CD Button until the display shows “Insert iPod”.
2.
of iPod docking station located on the top of the unit, insert your iPod into the
docking tray, once connected the display will show “iPod” on the display.
3. Press the ►II Button to Play or Pause tracks on your iPod.
4. Press the ▶▶I or I◀◀ Buttons to skips to the next or previous iPod track.
5. To access the “iPod Menu”, press the MENU button.
6. To scroll up or down in the “iPod Menu”, press the Buttons on the remote
control.
7. To confirm the selection in the “iPod Menu”, press the SELECT Button on the remote control.
You can charge your iPod when you dock your iPod in both standby or on modes. It will charge
automatically when it is docked.
You can set the unit to turn on at a selected time
1. Press the TIMER Button to select between “On” and “Off”, your selection will be displayed on
the screen.(F.22)
2. To set the timer, ensure the unit is in standby mode, press and hold the TIMER Button until the
display shows “Timer Set” and the “hour” digit of the timer clock on the display will flash. (F.23)
3. Press the ▲ or ▼ Buttons to set the time and press the TIMER Button to confirm.
4. When the time to switch on the system is set, press the ▲ or ▼ Buttons to select the mode you
wish the unit turn on to (FM/DAB/CD/iPod). Press the TIMER Button to confirm.
5. The display will then flash the volume level. Press the ▲ or ▼ Buttons to select the on volume
level and then press the TIMER Button to confirm and the timer setting is now completed.
LISTENING TO YOUR iPod
CHARGING UP YOUR iPod
ON TIMER FUNCTION
Slide the door
NAVIGATE/FOLDER
devices you wish
A 3.5mm Stereo AUX IN is located at the back of the unit, you can connect any other music player
(MP3 Player)
to listen to.
1. You will need an Auxilary Cable (not included) to connect your other audio sources.
2. Press the AUX Button to select the AUX Input mode, the display will show “AUX”.
3. Adjust the volume control for your desired sound output level.
AUX INPUT
LISTENING TO YOUR COMPACT DISCS
F22 F23