Blue Microphones VPW425 - Manual (Page 24)

22 ViewSonic VPW425
Variable and Fixed Audio Output
Setting Output Using OSD
You can set the type of output this monitor outputs from its audio output jack located in the rear of the moni-
tor. By using an OSD based switch, you can easily choose between variable or fixed audio outputs. To set the
audio output setting:
1. Press the MENU +/- keys on the remote or the front control panel.
2. Use the ADJ +/- keys to navigate to “SOUND” OSD sub-menu.
3. Use the MENU +/- keys to select the AUDIO OUTPUT option.
4. Use the ADJ +/- keys to change setting between FIXED or VARIABLE.
Quick View
Using Quick View on Remote Control
Quick View allows you to quickly switch between the channel currently
watched and the channel previously watched. Simply press the Quick
View key on the remote control to switch. Repeated pressing of the Quick
View key will switch the channels back and forth between the two.
Sound Adjustments
Sound Adjustments Using OSD
Sound adjustments are available to enhance the sound performance of the monitor. These adjustments will
affect the monitor’s built-in speakers and the AUDIO OUTPUT jacks when set to “Variable” (see above sec-
tion). To access sound adjustments:
1. Press the MENU +/- keys on the remote or the front control panel.
2. Use the ADJ +/- keys to navigate to “SOUND” OSD sub-menu.
3. Use the MENU +/- keys to select the various options described in this section.
AUDIO OUTPUT
Sets the type of audio output sent from the audio output jacks located
in the rear of monitor.
„ VARIABLE
When set to Variable, audio output is affected by the monitor’s
internal audio controls including bass, treble, surround, BBE, bass
extension, and volume.
„ FIXED
When set to Fixed, the audio output bypasses the monitor’s inter-
nal audio control so that functions such as bass, treble, surround,
BBE, bass extension, and volume controls have no effect.
BASS
Adjusts the BASS level of the sound. For more bass response,
increase the BASS level.
TREBLE
Adjusts the TREBLE level of the sound. For more vocal and high
frequency response, increase the TREBLE level.
BALANCE
Adjusts the BALANCE level between LEFT and RIGHT channels.
A value of 50 is the center point between LEFT and RIGHT. To shift
the sound towards the RIGHT, increase the value up to 100. To shift
the sound towards the LEFT, reduce the value down to 1.
SRS ® Surround Sound and BBE ® Sound
This monitor is equipped with SRS ® Surround Sound and BBE ®
Sound Maximizer circuitry. Use SRS Surround Sound to simulate a
surround sound effect if you are not using a multi-channel sound
setup. Use the BBE Sound Maximizer when using the monitor to
playback live performance related audio programs.