PureFlow AirDog RP-150 - Dodge Cummins 2005-2013 User Manual
Page 3
3
OVERVIEW
Welcome to the
Raptor™ Fuel Pump!
The Raptor™ Fuel Pump is a Premium replacement lift pump for the Dodge Cummins 24 Valve
5.9L/6.7L diesel engine. A complete installation kit is included.
The output pressure for the 5.9L/6.7L 24 Valve Cummins engine is factory set at 15/18 PSI.
Pressure and flows are approximate as they will vary with fuel temperature and as the brushes
wear in, also from variations of vehicle voltage/amp output and fuel line installation.
The RP-100 is recommended for stock and slightly modified 5.9L/6.7L Cummins Diesels.
The RP-150 is recommended for highly modified 5.9L/6.7L Cummins Diesels.
The Raptor™, a gerotor fuel pump, features an adjustable pressure regulator and has a protective
wire screen insert at the fuel inlet.
PureFlow AirDog Products are Manufactured with a Personal
Touch,
Unsurpassed Attention to Detail
And
The Most Stringent Quality Assurance!
TYPICAL DODGE CUMMINS INSTALLATION LAYOUT!
NOTE: The pictures used in this manual are for example only and may not picture components
exactly the same as found on your truck.
Figure 1