Fast & Fluid TMHC-Dispenser - Manual (Page 4)

p4
© Fast & FLuid Management, TmHC manual
Installation
Attention! Please do not switch on the machine before removing the
transport protection (roll of packing foam) as explained in step 2
Step 1 - Detach the TMHC from its transport skid
> >
Place the skid close to the end
destination and remove its plastic
wrapping. Unscrew all four
transport brackets. The brackets can be removed at
the top of the aluminum corner
beams. Bring the TMHC to operation
location, lift at the lower side
panels (two people can lift the
TMHC).
Attention! Please take care not to damage the TMHC surfaces while
removing packaging (e.g. with knife).