L.B. White AW250(building controller) - Manual (Page 11)

11
MANUAL SHUT-OFF VALVE, HOSE
AND REGULATOR ASSEMBLY
REGULATOR
NIPPLE REGULATOR VENT
GAS HOSE
ADAPTER
SEDIMENT TRAP TO CONTROL
VALVE INLET
GA
NIPPLE
VALVE, MANUAL
SHUT-OFF
1. Always use approved pipe thread compound suitable
for use with L.P. gas or natural gas on the threaded
connections.
2. Assemble the components together according to the
figure. This view is to show general assembly of the
components only. The regulator must always be
mounted so its vent, regardless of location on the
regulator, is always pointed downward.
3. Tighten all connections securely.
4. Check all connections for gas leaks using approved
gas leak detectors.
FIG. 6