Steele Products SP-WE180 - Manual (Page 17)

17
Problem Possible Cause Correction
No intake of
chemicals
Injection tube not
securely inserted into
pressure washer
Push firmly into machine
Tube cracked or split Replace tubing
Wrong nozzle setting Switch nozzle to low-pressure
(See page10 Fig.6)
Nozzle blocked Clean nozzle with nozzle tip cleaner
Injection tube
strainer clogged
Clean strainer
Dried chemicals in
injector
Dissolve by running warm water through
the injection tube
Trigger will not
move
Gun safety lock
engaged
Release safety lock
Troubleshooting