Steele Products SP-HO76 - Manual (Page 5)

5
Owner’s Manual
AUTO-OFF
NOTE: This function should only be set if you desire that the heater be automatically shut off
after a certain period of time (1 to 10 hours from the time the function is set)
NOTE: Always set the desired temperature prior to setting the Timer, so that the heater will
shut off at the desired temperature setting.
*Press the Temp/Timer button until the timer icon blinks. The hour display will appear. The
Auto Off icon will also appear.
*Use the Up and Down arrow buttons to set the heater operation time between 1 and 10 hours.
This function will activate once the timer icon stops blinking.
*The heater will automatically turn-off when time runs out.
NOTE: If the desired temperature was set prior to setting the timer function, the heater will
cycle on and off as per the selected desired temperature setting and will discontinue operation
once the programmed timer setting has been reached.
AUTO-ON
NOTE: This function provides a delayed start option and should only be set if you desire that
the heater be automatically turned ON after a certain period of time (1 to 10 hours from the
time the function is set).
NOTE: Always set the desired temperature prior to setting the timer, so that the heater will turn
on at the desired temperature setting
.
*Press the Temp/Timer button until the timer icon blinks. The hour display will appear .The
Auto On icon will also appear.
*Use the Up and Down arrow buttons to set the heater start time between 1 and 10 hours. This
function will activate once the timer icon stops blinking.
*The heater will automatically turn on when time expires.
NOTE: If the desired temperature was set prior to setting the timer function, the heater will
cycle on and off as per the selected desired temperature setting once the heater begins to
operate.
6) FAHRENHEIT/CELSIUS FUNCTION:
NOTE: This heater offers the option to read the temperature setting in either
Fahrenheit or Celsius scales.
*F/C feature functions from only the power or set temperature screens.
*Press F/C button to toggle between Fahrenheit and Celsius.
NOTE: If not use the heater, please turn off the master power switch (located below the digital control panel on
the side of the heater) to OFF position.