Steele Products SP-GG120CM - Manual (Page 18)

PILOT
OFF
CIRCUIT BREAKER DC
CIRCUIT BREAKER AC
ON
ENGINE SWITCH
PUSH TO RESET
17
1200W Generator
Operation (cont’d)
Starting Instructions
Turn the fuel valve to the OPEN position.
NOTE: Before you start generator make sure the unit has enough oil and fuel. Also disconnect all loads from
generator.
Put the Choke lever to the CHOKE
position.
Put the Choke lever to the Run position
after engine is warm.
Turn the engine switch to the ON position.
3
Pull the recoil start until generator
starts.
4
1 2
5