Steele Products SP-PT211 - Manual (Page 3)

Owner’s Manual
3
WARNING!
Please read and understand all instructions. Failure to follow all instructions listed below may
result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS
Work Area
1. Keep your work area clean and well lit. Cluttered benches and dark areas will invite accidents.
2. Do not operate power tools in explosive atmospheres such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool. Distraction can
cause you to loose control.
Electrical Safety
1. Power tool plugs must match the outlet.Never modify the plug in any way.Do not use any
adapter plugs with earthed(grounded)power tools.Unmodified plugs and matching outlets
will reduce risk of electric shock.
2. Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is grounded.
3. Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet.
Keep the cord away from heat, oil, sharp edges or moving parts. Damaged cords should be
replaced immediately by qualified repair personnel. Damaged cords will increase the risk of
electric shock.
5. When operating a power tool outside, use an outdoor heavy duty extension cord and use in
conjunction with a residual currect device (RCD).
GENERAL SAFETY RULES