Off Road Unlimited 60330-F Dana 44 Axle Crossover Steering System 87-97 GM IFS Conversion using 95-97 Ford Dana 60, 10-12 lift, w/bolt-on type caliper mount - Manual (Page 3)

ORU- Dana 60 Axle Crossover Steering System
Bill of Materials, P/N 60030-E&F, & 60330-E&F
60330-E Kit (87-97 GM IFS Conversion using '92-'94 Ford Dana 60, 10-12" lift, w/"slider"
type caliper mount):
60031-A 1
Pitman arm
60032
1 Upper tie rod
60033
1 Lower tie rod
60034L
1 LH jam nut
60034R
1 RH jam nut
60036-EC
1 Knuckle (slider mount)
60038-B 1
26" drag link
90004
1 Anti-seize
60330-F Kit (87-97 GM IFS Conversion using '95-'97 Ford Dana 60, 10-12" lift, w/"bolt-on"
type caliper mount):
60031-A 1
Pitman arm
60032
1 Upper tie rod
60033
1 Lower tie rod
60034L
1 LH jam nut
60034R
1 RH jam nut
60036-FC
1 Knuckle (bolt-on mount)
60038-B 1
26" drag link
90004
1 Anti-seize
Grade 8 nut torque specifications
5/16" nuts 20 ft. lbs. M6 nuts 9 ft. lbs.
3/8" nuts 35 ft. lbs. M8 nuts 23 ft. lbs.
7/16" nuts 60 ft. lbs. M10 nuts 45 ft. lbs.
1/2" nuts 75 ft. lbs. M12 nuts 75 ft. lbs.
9/16" nuts 160 ft. lbs. M14 nuts 120 ft. lbs.
5/8" nuts 175 ft. lbs. M16 nuts 165 ft. lbs.
offroadunlimited.com
page 2