Off Road Unlimited 60330-D Dana 44 Axle Crossover Steering System Part 60330-C&D - Manual (Page 3)

ORU- Dana 44 Axle Crossover Steering System
Bill of Materials, P/N 60030-C&D, & 60330-C&D
60330-C Kit (87-97 GM IFS Conversion using Dana 44 or 10-bolt, 10-12" lift w/tie rod facing
"nut-up"):
60031-A 1
Pitman arm
60032
1 Upper tie rod
60033
1 Lower tie rod
60034L
1 LH jam nut
60034R
1 RH jam nut
60036-C 1
Knuckle (nut-up)
60038-B 1
26" trac bar
90004
1 Anti-seize
60330-D Kit (87-97 GM IFS Conversion using Dana 44, 10-12" lift w/tie rod facing "nut-
down"):
60031-A 1
Pitman arm
60032
1 Upper tie rod
60033
1 Lower tie rod
60034L
1 LH jam nut
60034R
1 RH jam nut
60036-D 1
Knuckle (nut-down)
60038-B 1
26" trac bar
90004
1 Anti-seize
Grade 8 nut torque specifications
5/16" nuts 20 ft. lbs. M6 nuts 9 ft. lbs.
3/8" nuts 35 ft. lbs. M8 nuts 23 ft. lbs.
7/16" nuts 60 ft. lbs. M10 nuts 45 ft. lbs.
1/2" nuts 75 ft. lbs. M12 nuts 75 ft. lbs.
9/16" nuts 160 ft. lbs. M14 nuts 120 ft. lbs.
5/8" nuts 175 ft. lbs. M16 nuts 165 ft. lbs.
offroadunlimited.com
page 2