Off Road Unlimited 60013 Slip Yoke 2001-08 GM 2500-3500 HD 4WD Slip Yoke Kit - Manual (Page 3)

ORU- GM 2500/3500 HD Slip Yoke Conversion Kit’s
60013-30 (07-08) & 60013-31 (01-06)
Part One: Transfer Case Removal and Modifications-
1) Remove transfer case drain plug and drain oil.
2) Remove front and rear drive shafts (if installed).
3) Unplug wire harness from transfer case.
4) Support transfer case. Remove attaching nuts and transfer case.
5) Mark location of wires and speed sensors. The sensors will need to re-installed in the original
locations.
6) Remove the bolts holding the case halves together. On some models, you will have to remove the
external shift mechanism to access the attaching bolt (photo 1).Remove the rubber access plug to expose
the snap ring. Remove the spring loaded detent from the lower portion of the transfer case (photo 2).
Open snap ring and separate case halves. Set the back half aside.
Photo 1
Photo 2
offroadunlimited.com
page 3