JLG G6-42P Parts Manual - Manual (Page 156)

ENGINE & ATTACHING PARTS
G6-42P 91404001 4-40
Figure 4-4 Fuel Tank & Lines
1
5
2
4
6
3
216
219
208
4
101
104
302
102
301
102
103
220
PAP23400
NOTE: NEW VERSION
1. APPLY LOCTITE ® 30512 TM (0100093) ON ALL
ADAPTER THREADS UP TO GASKET START AT
BOTTOM OF THE THREADS, 360 DEGREE. AIR DRY
FOR 3 TO 4 MINUTES ON BOTH MATING PARTS.
2. APPLY 1/2 IN. ALL THE WAY AROUND THE
FILLER NECK THREADS. APPLY THE ADAPTER TO
THE FILLER NECK ON THE TANK.
3. ONCE ASSEMBLED, NO FUEL SHOULD BE
ADDED FOR 8 HOURS.
NOTE: WHEN USING FUEL CAP ADAPTER KIT, 2902446 OR OLD VERSION LOCKING CAP
1. COAT ALL THREADS OF ADAPTER (ITEM 301) & SET SCREWS (ITEM 303) WITH LOCTITE ® 641 TM (14404978)
BEFORE INSTALLING FILLER NECK ADAPTER.
2. HAND TIGHTEN SET SCREWS JUST UNTIL RESISTANCE IS FELT. OVERTIGHTENED SCREWS WILL DISTORT
PLASTIC THREADS.
OPTIONAL
LOCKING CAP
OLD
VERSION
NEW
VERSION
S/N 0160020156 & After