Billion Electric Company BIPAC 3013G - Manual (Page 25)

24
2. The RT-Set scans the available AP within your LAN. Those AP are listed with their SSID.
Click the wireless AP that you are going to connect with and then click the “Next” button.
You may also click the “Refresh” button to scan wireless AP again.
3. The “unsecured network” window may pop up if the AP you select doesn’t use security
encryption settings. Click the “OK” button after your confirmation.
4. Click “OK” after configuring the profile content to be corresponding to the AP that you are
going to connect with. If you are connecting to an AP without security encryption, please
click “OK” button without configuration.