InnoMax Convert-A-Bed Module User Manual
Quick start up, Convert-a-bed module assembly, World headquarters
QUICK START UP
CONVERT-A-BED MODULE ASSEMBLY
©
08/08
Vinyl Liner
Optional Foundation
& Frame
Interlocking Bolsters
Top Enclosure
Convert-A-Bed Advanced
Edge Support System
InnoCoil
Latex &
Memory Cell
Modules
InnoCoil
Latex &
Memory Cell
Modules
Vinyl Liner
Optional Foundation
& Frame
Interlocking Bolsters
Top Enclosure
4-Cylinder Tube modules:
Place Vinyl Cylinder Tubes in
Vinyl Lined Dish
Optionally, tubes may be filled and drained
in bath tub
Vinyl Liner,
required for Tube Modules is then tucked
around dish.
and begin filling with
proper adapters for faucet, hose and tubes.
. Be sure to hold waveless tube
insert securely when moving to avoid
bunching. Comfort layer insulation is then
laid over Cylinder Tubes. DO NOT USE
HEATERS WITH TUBE MODULES.
All Fluid Modules: Do not fill above
height of vinyl liner. Burp noisy air
bubbles out of Tubes, add water
conditioner and cap tightly.
5-All models: Zip Top Enclosure
securely around modules and cover
with good quality mattress pad and
bedding to protect your investment.
Enjoy your Convert-A-Bed sleep
system for the best rest of your life.
1. Carefully remove all Bed components
from cartons. Avoid use of knives and
box cutters. Bed is assembled from
bottom up.
2. If using optional foundation,
place foundation on metal frame
or legs.
3-All models:
u
Place Midfill fluid chamber (2 for dual
systems) evenly distributed in dish and
begin filling.
Place nzipped
Top Enclosure on the foundation
or platform and insert Interlocking
Bolsters. Insert Head to Foot
Bolster Rails A first. Side to Side
Rails B are then inserted to
form dish. If upside down or
not completely unfolded
Bolsters will not reach head
to foot or side to side.
4-Midfill Fluid Modules:
Single or dual low watt
heaters (Maximum 120 Watts
each) should be installed according
to the manufacturers instructions.
Vinyl Liner, required for Midfill
Modules is then tucked around dish.
4-
InnoCoil, Latex and Memory-Cell
modules: Center modules left to right
in Covert-A-Bed dish with Firm or
Plush sides up accordingly. To
readjust firmness, flip InnoCoil,
Latex and Memory-Cell module
from head to foot. Optional Vinyl
Liner is not required for InnoCoil,
Latex and Memory-Cell
modules.
Comfort Layer
Comfort Layer
Cylinder Modules
Cylinder Modules
Cylinder Tubes
Cylinder Tubes
(See other side for Air Bed setup)
Vinyl Liner
Mid-Fill
Modules
Vinyl Liner
Mid-Fill
Modules
Dual Low
Watt Heaters
Dual Low
Watt Heaters
Mid-Fill Fluid
Chambers
Mid-Fill Fluid
Chambers
(Max. 120 Watts Ea.)
HEAD RAIL
THIS SIDE UP
Match Dot to Side Rail
Install this Convert-A-Bed Rail First
A
S
ID
E
R
A
IL
T
H
IS
S
ID
E
U
P
M
a
tc
h
D
o
t
to
H
e
a
d
R
a
il
In
s
ta
ll
th
is
C
o
n
v
e
rt
-A
-B
e
d
R
a
il
S
e
c
o
n
d
B
WORLD HEADQUARTERS
530 W. Elk Pl. Denver, CO 80216
303-296-9530
HEAD RAIL
THIS SIDE U
P
Match Dot to
Side Rail
Install this C
onvert-A-Be
d Rail First
A
SID
E RA
IL
THI
S S
IDE
UP
Matc
h D
ot to
He
ad R
ail
Ins
tall
thi
s C
onv
ert-
A-B
ed R
ail S
eco
nd
B
Convert-A-Bed Advanced
Edge Support System
Match HEAD RAIL A
& SIDE RAIL B labels
for proper setup.