BenQ AWL-500 - Manual (Page 11)

BENQ Corporation
-7-
II. After searching for a few seconds, information on the result of the search will be
shown in a window.
III. When the Access Point is found within the network, a configuration window will
appear. You will see the basic information of the Access Point, such as MAC
Address、 SSID 、 IP 、Channel、WEP Mode and Firmware Version.
ITEM Description
MAC Address It is a hardware identification number on the network Access Point
SSID SSID is a unique ID on the network Access Point
IP Address Current Access Point IP Address
CH Access Point channel id
Mode Access Point WEP Mode
Firmware Version Displays the firmware version that is equipped with your hardware