Philips goLITE M2 HF3230 - Manual (Page 9)

7
Interactive demo at www.ApolloHealth.com
Plugging In Your goLITE
Your goLITE comes with a 9V AC/DC adapter. The adapter includes a set of interchangeable plugs that
are designed to be used in electrical outlets worldwide. Your adapter can operate on AC power ranging
from 100–240 volts.
Use the enclosed adapter only, or a replacement adapter specified by Apollo Health for use with the
goLITE. For safety and proper operation of your goLITE, never use an unapproved adapter.
Charging Instructions
IMPORTANT: Charge your goLITE for at least 8 hours before initial use.
Your goLITE contains an internal Li-Ion battery pack. To charge your goLITE, connect your AC/DC
adapter to a wall outlet and plug the goLITE into the adapter. The battery display icon will flash, which
indicates that the battery is charging in rapid mode. Once the battery is charged, the battery icon will
switch to a steady display, indicating that the battery is receiving a trickle charge only.
Charge your goLITE for at least 8 hours before initial use. Subsequent charges should be complete in
three to four hours. A single charge should last for three to five treatment sessions.
WARNING: Do not incinerate, disassemble, or expose to high temperatures (above 60°C/140°F). Bat-
teries may cause overheating, fire, or bursting. Dispose of the battery properly. Use the specified AC/DC
adapter only.
Getting Started