Philips Norelco NIVEA NIVEA FOR MEN razor HS8420 with battery indicator - Manual (Page 10)

ENGLISH
◗ Never dry the Shaving Unit with a towel or
tissue as this may damage razor heads.
◗ Do not use abrasives, scourers or liquids such
as acetone to clean the appliances.
Shaving Unit: After Each Use
◗ It is recommended that you clean the Shaving
Unit thoroughly after each use to maintain
optimal shaving performance.
1 Press the on/off button to turn razor oN.
2 Rinse Shaving Unit under hot tap water by
letting the water run in and around all the
openings for at least 30 seconds.
C
3 You can also immerse the Shaving Unit in
hot water for at least 30 seconds.
Make sure the razor is ON to thoroughly remove
any residue.
BE CAREFUL TO TEST WATER FIRST SO AS NOT
TO BURN OR SCALD HANDS.
4 Turn razor oFF and shake off excess
water.
5 You can store the razor in the charging
stand.
18 ENGLISH
6 Put the Protective Razor Head Cap on
razor to protect heads.
Note: If lotion build-up has occurred, remove
Shaving Unit and soak for a few minutes under
hot water or a degreasing liquid (e.g. alcohol). Be
sure to thoroughly rinse Shaving Unit under tap
water before using razor.
Shaving Unit: Once A Month
Do not mix up the cutters and combs as the
shaving performance may be adversely affected
for several weeks before optimal shaving
performance is restored.
1 Turn razor oFF.
C
2 Remove Shaving Unit from razor by pulling
Shaving Unit straight up from razor.
C
3 Using your thumb and forefinger turn the
razor head clockwise and lift the comb
with water off of Shaving Unit.
4 Remove and clean one set of cutters and
combs at a time.
19
30
sec
C F