Philips AZ1015-17 - Manual (Page 9)

CD PLAYER
9
English
1 Set the POWER control to CD.
2 Press / OPEN to open the CD compartment.
3 Insert an audio CD (printed side up) and close the CD
compartment.
™ The CD player starts and scans the contents list of the CD.
Then, the CD player stops. Display indication: the total
number of tracks.
4 Press the 2; button to start CD play.
™ Display indication: the current track number.
5 Press the 9 button to stop CD play.
™ Display indication: the total number of tracks.
You can pause CD play by pressing 2;. Continue CD play by
pressing the button again.
™ Display indication: the current track number (flashing).
Note: CD play will also stop if:
– you open the CD compartment,
– the end of the CD is reached, or
– you move the POWER control.
If you make a mistake when operating the CD player, or if the
CD player cannot read the CD, the display shows E or no. (See
”TROUBLESHOOTING”.)
If you press 2; and there is no CD inserted, the display
shows no.
CD MODE
ECORD
SEARC H PLAY RECORD
OPEN
Playing a CD
Environmental information
All redundant packing material has been omitted. We have done our utmost to make the
packaging easily separable into three mono materials: cardboard (box), polystyrene foam (buffer)
and polyethylene (bags, protective foam sheet).
Your set consists of materials which can be recycled if disassembled by a specialized company.
Please observe the local regulations regarding the disposal of packing materials, dead batteries
and old equipment.
AZ1015/17.1a eng usa 8/17/00 5:02 PM Page 9