Philips TV antenna SDV2740 Digital Indoor HDTV-UHF-VHF-FM - Manual (Page 4)

4
3.2 Connect to your TV
1
Connect one end of the coaxial cable to
signal output of the antenna and the other
end to the input on your TV receiver.
1
2
Connect DC plug to the antenna and the
power supply to a 120V AC outlet.
2
3.3 Setting up your antenna
Antenna can be set up on a flat surface (table)
on a horizontal or vertical position.
D Note
Horizontal position for UHF and VHF.
Vertical position for UHF only, and keep the
dipoles to minimum length.
Horizontal position: Attach the stand to the
back of the antenna in a horizontal position
using the two screws provided.
3
Vertical position: Attach the stand to the back of
the antenna in a vertical direction using the two
screws provided.
4
Mounting on the Wall: Mount two wood screws
with center distance of 63 mm (2.5”) into the
wall. Hang the two notch holes onto the two
wood screws on the wall.
5
2
TV
ANT.
1
3
63 mm (2.5")
5
4
2740_27.indb 4 5/8/08 2:43:20 PM