Philips 19PS54C - Manual (Page 14)

H
OW TO
U
SE THE
S
OUND
(S
TEREO
/M
ONO
) C
ONTROL
AI ON
VOLUME 15
SOUND STEREO
AVL ON
INPUT TUNER
CLOCK
MUTE
CC
SURF
SLEEP
VOL VOL
CH
CH
SOUND
MENU
SMART SMART
PICTURE
1 2 3
4 5 6
7 8 9
0
STATUS/EXIT POWER
2
1
3
OR
AI ON
VOLUME 15
SOUND MONO
AVL ON
INPUT TUNER
12 STEREO
Y our TV can receive broadcast
stereo TV programs. The TV has
both an amplifier and twin speakers
through which the stereo sound can
be heard.
Press the MENU (M) button on
the remote, then the CHANNEL ▲ or
▼ buttons to scroll the on-screen
menu until the word SOUND appears
within the highlight box.
Press the VOLUME (+) or (–)
buttons to set the SOUND control
to STEREO or MONO.
Press the STATUS button on the
remote control to clear the screen.
BEGIN
S TEREO /M ONO TV S OUND
NOTE: The TV’s on-screen “STEREO”
indicator appears whenever the TV detects an
incoming stereo signal. Be sure the TV’s
STEREO control is also turned “ON” in order
for the stereo sound to be heard through the
TV’s twin speaker system.
COL TEMP COOL
AI ON
VOLUME 15
SOUND STEREO
AVL ON
VOLUME 15
CLOCK
MUTE
CC
SURF
SLEEP
VOL VOL
CH
CH
SOUND
MENU
SMART SMART
PICTURE
1 2 3
4 5 6
7 8 9
0
STATUS/EXIT POWER
2
1
3
H
OW TO
U
SE THE
V
OLUME
C
ONTROLS
U se the Volume control to set the
TV’s volume level on the TV
screen. The Volume level or scale
will be seen each time the VOLUME
buttons (on the TV or remote) are
pressed. (0 being the lowest, 63
being the highest.)
Press the MENU button on the
remote, then press the CH (+) or (–)
to scroll the on-screen menu until the
word VOLUME appears within the
highlight box.
Press the VOL (+) or (-) buttons
to adjust the volume level.
Press STATUS/EXIT button to
clear the screen.
BEGIN
V OLUME C ONTROL
Try it out.
Press the VOL (+) or
(–) buttons. The
VOLUME indicator
should appear at the
bottom of the screen.
If the VOLUME
LIMIT control is
turned on (see
below), the TV
sound cannot be
adjusted beyond its
current settings (for
example 25).
S MART
H ELP
When the Volume button is pressed
an on-screen display will appear.
Remember,
if the TV is set to
STEREO but the
current channel is
not broadcasted in
stereo, the sound at
the TV will remain
monaural. (mono.)
S MART
H ELP