Connecting to power – Philips SPF3410-G7 User Manual

Page 3

English

Connecting to power

1. Place your PhotoFrame on a flat surface.
2. Connect the power adapter as below (1) and slide the power

switch to the “ON” position (2).

• Power systems and plug types may vary depending on your

country/region. Before use, make sure if the power adapter
supports your local voltage.

• To turn off the PhotoFrame, slide the power switch to the “OFF”

position.

GN104F00_GN-A18-G7_QSG_en.fm Page 3 Tuesday, September 8, 2009 5:36 PM