Philips HTL2111A-F7 - Manual (Page 14)

12 EN
6 Product
specifications
Note
•
Specifications and design are subject to change without
notice.
Amplifier
• FTC total output power 34W
• Left + Right : 34W (1%THD, 8ohm,
90Hz-20kHz)
• RMS total output power: 40W RMS
(+/- 0.5 dB, 10% THD)
• Frequency response: 20 Hz-20 kHz /
±3 dB
• Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
• Input sensitivity:
• AUX: 2Vrms
• AUDIO IN: 1Vrms
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
• Sampling frequency:
• MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz, 22
kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz
• WMA: 44.1 kHz, 48 kHz
• Constant bit rate:
• MP3: 8 kbps-320 kbps
• WMA: 64 kbps-192 kbps
• Version:
• WMA: V7, V8, V9
USB
• Compatibility: Hi-Speed USB (2.0)
• Class support: USB Mass Storage Class
(MSC)
• File system: FAT16 and FAT32
• Supports MP3 and WMA file formats
Bluetooth
• Bluetooth profiles: A2DP
• Bluetooth version: 2.1 + EDR
Main unit
• Power supply: 120 V~, 60 Hz
• Power consumption: 40 W
• Standby power consumption: ≤ 0.5 W
• Speaker impedance: 8 ohm (full range)
• Speaker drivers: 4 x 54.5 mm (2")
• Dimensions (WxHxD):
845 x 74.5 x 94 mm
• Weight: 2.0 kg
Remote control batteries
• 1 x AAA-R03-1.5 V