Philips DS8400-37 - Manual (Page 10)

8 EN
Note
•
Before pressing any function button on the remote
control, first select the correct source with the remote
control instead of the main unit.
•
If you are not going to use the remote control for a
long time, remove the battery.
Charge the battery
Caution
• Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the
bottom of the unit.
• Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
• Before connecting the AC adaptor, ensure you have
completed all other connections.
1
Place the unit onto the charge base.
2
Insert the plug of the AC adaptor to the
DC IN socket on the back of the charge
base.
3
Connect one end of the AC power cord
to the AC adaptor.
4
Connect the other end of the AC power
cord to the wall outlet.
Use built-in battery
Note
• Always bring your product to a professional to remove
the built-in battery.
Caution
• Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
When the battery is fully charged, you can
also operate the unit on built-in rechargeable
battery.
IN