Philips 6947XL-41 - Manual (Page 16)

16
ENGLISH
C
7 Remove and clean one cutter and comb at
a time.
Do not clean more than one cutter and comb at
a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
8 Separate the cutter from the comb.
C
9 Only brush the cutter in an upward motion.
Use the short bristled side of the brush.
C
10 Brush the slots of the comb.
For optimum performance, razor cutters and
combs should be cleaned in a degreasing liquid
(e.g. Philips Norelco Shaving Head Cleaning Spray,
model HQ110 or alcohol). This helps prevent wear
of the shaving heads.
C
11 Replace the cutter and comb into the
Razor Head Assembly.
12 Repeat the process for the other two sets
of cutters and combs.
13 Replace the frame.
C
14 Turn the wheel clockwise until it locks into
place.
1
2
12_6955XL_6947XL_6945XL_Nov.indd 16 11/29/12 2:23 PM