Philips MCD709-37 - Manual (Page 37)

37
English
Other Functions
2
When you reach the desired length of time, stop
pressing SLEEP/TIMER.
➜ ” SLEEP” appears.
To deactivate the sleep timer
● Press SLEEP/TIMER repeatedly until “ 00” is
displayed, or press ECO POWER/
STANDBY-ON B (B on the remote).
In standby mode, the timer setting enables
the system to switch on automatically at a set
time.
Wake-up timer setting
IMPORTANT!
– Before setting the timer, ensure that
the clock is set correctly.
1
Press and hold SLEEP/TIMER until the time
flashes on the display.
➜
”
TIME SET” scrolls. Then, the hour digits
flash on the display screen.
2
Turn VOLUME -/+ clockwise or anticlockwise
or press VOLUME -/+ on the remote to set
the hours.
3
Press SLEEP/TIMER to confirm.
➜
The minute digits flash on the display screen.
4
Turn VOLUME -/+ clockwise or anticlockwise
or press VOLUME -/+ on the remote to set
the minutes.
5
Press SLEEP/TIMER to confirm the time
setting.
➜ ” OFF” flashes on the display screen.
6
Turn VOLUME -/+ clockwise or anticlockwise
or press VOLUME -/+ on the remote to select
“ON”.
➜
icon appears on the display screen.
To deactivate the timer
●
Select “OFF” at Step 6.
pg 001-041_MCD709_37-Eng 2006.7.27, 17:03 37