Philips AZ1035-17 - Manual (Page 12)

CASSETTE RECORDER
12
English
1 Set the POWER control to TAPE.
2 Press OPEN·STOP / 9 to open the cassette compartment.
3 Insert a recorded cassette with the open side upwards and close
the cassette compartment.
4 Press PLAY 1 to start playback.
5 Press 6 or 5 to rewind or fast forward the tape.
6 To stop the tape press OPEN·STOP / 9.
Note: The keys are released at the end of the tape.
Recording is permissible insofar as copyright or other rights of
third parties are not infringed upon.
For recording on this set you should use a cassette of the type
NORMAL (IEC type
I). This deck is not suitable for recording on
cassettes of the type CHROME (IEC type II) or METAL (IEC
type IV).
The recording level is set automatically. The controls VOLUME and
DBB do not affect the recording.
At the very beginning and end of the tape, no recording will take
place in the 7 seconds during which the leader tape passes the
recorder heads.
Protecting tapes from accidental erasure
Keep the cassette side to be protected in front of you and snap off
the left tab. Now, recording on this side is no longer possible.
To record again on this side of the cassette, cover the opening with
a piece of adhesive tape.
General information on recording
OPEN•STOP
SEARC
PAUSE
CD RADIO CASSETTE RECORDER
AZ1035
H PLAY RECORD
Playing a cassette
AZ 1035 /17
page
12