Philips Norelco Shaver 5100 Series 5000 wet & dry electric shaver AT928 TripleTrack heads Pivot Flex & Float system 60 min shaving 1 hour charge AquaTech wet & dry technology with Aquatec wet and dry and Pop-up trimmer - Manual (Page 35)

Problem Possible cause Solution
The shaver does
not work when I
press the on/off
button.
The rechargeable
battery is empty.
Recharge the battery (see
chapter ‘Charging’).
The temperature
of the shaver is
too high. In this
case, the shaver
does not work.
As soon as the temperature
of the shaver has dropped
sufficiently, you can switch on
the shaver again.
The shaver does
not work, although
it is connected to
the mains.
If the shaver
does not work
when you press
the on/off button,
the battery is
empty.
This shaver is not designed
to be used directly from the
mains, so you should recharge
the battery (see chapter
‘Charging’).
English
34
AT928_EN_A6_CS3.indd 34 13.5.21 1:53:25 PM