BT Verve 100 - Manual

Verve 100 – Edition 5 – 18.8.00 – 3250
Digital Cordless Telephone
User guide
Verve 100
This equipment is not designed for making emergency telephone
calls when the power fails. Alternative arrangements should be made for
access to emergency services.
This product is intended for connection to analogue public switched
telephone networks and private switchboards in the United Kingdom.
Verve 100 – Edition 5 – 18.8.00 – 3250
Offices worldwide
The telecommunications services described in this publication
are subject to availability and may be modified from time to time.
Services and equipment are provided subject to British Telecommunications
plc’s respective standard conditions of contract. Nothing in this publication
forms any part of any contract.
Touchtone ™ is a registered trade mark of
British Telecommunications plc in the UK.
© British Telecommunications plc 2000.
Registered Office: 81 Newgate Street, London EC1A 7AJ.
Registered in England No. 1800000.
Designed by: The Art & Design Partnership Limited.
Printed in Germany. Verve 100. Issue 1 (8/00) 4
Printed on paper which meets international environmental standards.
Siemens number: A31008-G100-P100-1-7619
CE compliant to
89/336/EEC (EMC Directive) &
73/23/EEC (Low Voltage Directive)
0682
Additional features
To adjust the ringer volume
There are 3 volumes to choose from, with 1 being
the lowest.
Press the SET button, then the 5 button.
You will hear the current ringer volume.
KEYPAD Use the keypad to enter the setting you want 1-3.
Press the SET button to confirm.
Using the memory
You can store up to 10 numbers in the memory, each up to 22
digits long, which can then be speed dialled. Stored numbers
can include settings made with the ✱ and # buttons. You can
also enter a Pause by holding down the R (Recall) button.
To speed dial a stored number
Press the MEMORY button.
0-9 Enter the memory location number 0-9 under
which the number is stored.
Press the HANDSET button. The number is dialled
automatically.
7
Verve 100 – Edition 5 – 18.8.00 – 3250
To store a number in the memory
Press the SET button.
Press the MEMORY button.
0-9 Enter a number between 0-9 under which you
want to store the number.
KEYPAD Enter the telephone number to be stored.
Press the SET button to confirm.
You will hear a confirmation beep.
5 IKL
To adjust the earpiece volume
The volume of received calls can be set to 3
different levels. 1 is the lowest.
Press the SET button, then the 0 button.
KEYPAD Select a level 1-3 using the keypad.
Press the SET button to confirm.
To switch the keypad lock on and off
You can lock the keypad so that it cannot be used
accidentally while carrying it around.
You are still able to receive calls.
Press and hold down the # button until the display
shows:
The keypad is now locked and you cannot dial out.
Incoming calls can be answered as normal by
pressing the HANDSET button.
To unlock the keypad press and hold the # button
until the display returns to standby.
To adjust the ringer melody
There are 2 ringer melodies to choose from.
Press the SET button, then the 6 button.
You will hear the current ringer melody.
KEYPAD Select melody 1 or 2 using the keypad.
Press the SET button to confirm.
8
Verve 100 – Edition 5 – 18.8.00 – 3250
#
#
9
Verve 100 – Edition 5 – 18.8.00 – 3250
Problem Possible causes Solution
Registration did
not work.
No display.
No reaction when
pressing keypad
buttons.
No radio
connection to the
base station
icon flashing.
The battery is not
sufficiently
charged. Handset
and base station
were not prepared
for registration.
The battery is not
charged.
The keypad is
locked.
The handset is
outside the base
station range.
The handset is not
registered.
The base station is
not active.
Charge the battery
for 16 hours (see
pages 4 and 5).
Remove and then
re-insert the power
supply unit.
Charge the battery
or replace it (see
page 4).
Press for 1
second.
Move closer to the
base station.
Register the handset
(see page 5).
Check the power
supply unit at the
base station.
#
Within the 12-month guarantee period:
If you experience a problem with your product you should
contact the Helpline on 08457 908070. Calls are charged at
local call rates. If the problem is not remedied, you will be
advised to return your product to the helpline.
Outside the 12-month guarantee period:
If your product needs repair after the guarantee period has
ended, the repair must meet the approval requirements for
connection to the telephone network. We recommend that
you call the Helpline on 08457 908070 and ask for details of
our recommended repair agents.
Guarantee
General information
Help
Your Verve 100 can be connected to compatible switchboards.
If in doubt, please contact your switchboard supplier.
Your Verve 100 is pre-set to TONE dialling. You will hear a
tone beep each time you dial a number. Tone dialling is suitable
for all modern digital exchanges. If you cannot make a call with
TONE dialling you may need to switch to PULSE dialling.
10
Verve 100 – Edition 5 – 18.8.00 – 3250
Technical information
Switchboard compatibility
How many handsets can you have?
All items of telephone equipment have a Ringer
Equivalence Number (REN) which is used to calculate the
number of items that may be connected to any one
telephone line. The Verve 100 has a total REN of 1. Any
other instrument provided by BT may be assumed to have
a REN of 1 unless stated otherwise. A total REN of 4 is
allowed per telephone line. (For example: if the Verve 100
is used in conjunction with three extension telephones,
each with a REN of 1, then the total REN = 4.)
R&TTE
This product complies with the R&TTE Directive 99/05/EC.
To set the dialling mode
Press the HANDSET button.
Press the SET button.
Press the 1 button, then the 0 button.
Press the 4 button to set PULSE dialling.
Press the SET button to confirm.
Press the HANDSET button to return to standby.
If you wish to return to TONE dialling, press 2
instead of 4.
1
0
4 GHI
If you have to return your product
Pack the base station and handset securely, preferably in the
original packing. All parts must be returned, including line
cords, power supply unit and original batteries. We cannot
take responsibility for goods damaged in transit.