Specifications, Highlights – Philips RFX9200-37 User Manual
Page 2
Issue date 2013-01-31
Version: 3.0.13
12 NC: 8670 000 33067
UPC: 6 09585 14098 1
© 2013 Koninklijke Philips Electronics N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
Specifications
RFX9200/37
Network Extender
Highlights
Adressable IR ports
Addressable IR ports enable control of the same
type of devices in a rack independently (by the same
extender). Typically this is the case with multiple set-
top boxes to distribute content throughout the
house. Every device is asigned its own dedicated IR
port. As a result the device will only receive the IR
codes that are intended for this device and not for
any other. Without addressable IR codes, every
device will always receive all sent-out IR codes.
Smart feedback
The smart 2-way Pronto protocol regulates the
commands that are sent from the Pronto control
panel to the extenders. Each extender will
acknowledge the execution and the user will be
informed in case a command cannot be executed.
IR code range
The powerful IR-circuit is capable of transmitting
virtually any IR code. Where many remote control
systems are limited to 125 kHz, the Pronto
extenders can send IR-frequencies to up to 1 MHz.
Connectivity
• IR emitter connectors: 4
Accessories
• AC/DC Adaptor
• Printed User Guide
• Single IR emitter wires: 4
• Warranty Card
Infrared Capabilities
• Addressable IR output: Adjustable IR output level
• Carrier frequency range: 30k - 100kHz + 455kHz
RF Capabilities
• Adresses (ID's): 16
• Frequency (GHz): 2.4
•