Philips HTL2160-F7 - Manual (Page 11)

12 EN
5 Wall mount
Note
• Koninklijke Philips Electronics N.V. bears no
responsibility for improper wall mounting that results
in accident, injury or damage. If you have any query,
contact Philips Consumer Care in your country.
• Before wall mounting, make sure the wall can support
the weight of your SoundBar.
Screw length/diameter
Depending on the type of wall mounting your
SoundBar, make sure that you use screws of a
suitable length and diameter.
For information about how to wall mount your
SoundBar, see the quick start guide.
> 25mm
3 - 3.5mm
6 Product
specifications
Note
• Specifications and design are subject to change without
notice.
Amplifier
• FTC total output power: 31W
• Left + Right : 16W (1%THD, 4ohm,
150Hz-20kHz)
• Subwoofer: 15W (1%THD, 8ohm,
40Hz-150Hz)
• Total output power: 60W RMS (+/- 0.5 dB,
10% THD)
• Frequency response: 20 Hz-20 kHz /
±3 dB
• Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
• Input sensitivity:
• AUX: 2 V
• AUDIO-IN: 1V
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
USB
• Compatibility: Hi-Speed USB (2.0)
• Class support: USB Mass Storage Class
(MSC)
• File system: FAT16 and FAT32
• Supports MP3 and WMA file formats
• Sampling frequency:
• MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz, 22
kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz
• WMA: 44.1 kHz, 48 kHz
HTL2160_F7_UM_V4.0.indb 12 2013/5/21 17:04:14