Using y our daybr eak using y our daybr eak, Activating a demonstration simulation, Manual lamp operation – Philips DayBreak Duo HF3445 User Manual
Page 10: Napping

18
19
Activating a Demonstration Simulation
1
Press and hold
SUNSET
for 3 seconds. The unit will begin
the demonstration with a one minute sunrise simulation
and then continue with a one minute sunset. The
demonstration will repeat until stopped.
2
Press
LAMP
to end the demonstration.
Manual Lamp Operation
You can use the Daybreak to turn your lamp on and off for
reading or other illumination needs. Your lamp’s
ON/OFF
switch
must always remain in the
ON
position.
1
Press the
LAMP
button to cycle through four lamp
intensity settings: Dim, Medium, Bright, and Off.
While the lamp is on, the word
INTENSITY
will appear
on the display.
2
Press the or touch screen buttons to fine tune your
desired lamp intensity.
3
After 10 seconds without pressing any buttons, pressing the
LAMP
button once will turn off the lamp.
LAMP
DISPLAY
SNOOZE / NAP
SUNSET
SET
WAKE 1
1
2
1
2
LAMP
DISPLAY
Using Y
our Daybr
eak
Using Y
our Daybr
eak
Napping
Th
e Nap feature allows you to quickly set an alarm at any time of day, from 10 minutes up to a full hour.
1
Press
SNOOZE/NAP
. The word
NAP
will appear on the display. The last nap duration flashes.
2
Press the or touch screen buttons to adjust the nap duration.
3
Press
ENTER
or wait 10 seconds for the nap timer to begin. The display shows the number of
minutes remaining.
4
When the nap timer has finished, the backup alarm will sound. To turn off the alarm, press the
SNOOZE/NAP
button.
SNOOZE / NAP
SUNSET
SET
WAKE 1
WAKE 2
VOLUME
1
2
3