Philips MCD139B-37B - Manual (Page 2)

Speakers
Right Speaker
Subwoofer White
Red
Green
– –
Black
+
1 1
3
4
5
AC Power Cord
FM wire antenna
TV
2
ANTENNA
FM
(75 Ω)
Important!
– This set can only be operated after the
supplied DIN cable has been connected.
Tips
– See the User Manual for other TV
connection options.
– For connecting to a Progressive Scan
TV, refer to the user manual for proper
connections and detailed setup.
1
3
4
5
Connect the speaker wires of the right speaker and subwoofer to the
left speaker.
Connect the left speaker and the DVD player by using the supplied
DIN cable.
Connect the DVD player to your TV using the supplied composite video
cable.
Connect the AC power cord to the wall socket.
2
Connect the supplied FM wire antenna.
Setting up the TV
Press SOURCE ( DISC on the remote) to select disc source.
Turn on the TV and set it to the correct Video In channel.
1
2
A To listen to TV channels through this system, use the
audio cable (white/red, not supplied) to connect
AUX IN (L/R) jacks to the corresponding AUDIO
OUT jacks on the TV set.
● Before starting operation, press AUX on the
remote control to select “AUX” to activate the
input source.
B To listen to disc playback of this system through TV,
use the audio cable (white/red, not supplied) to
connect LINE OUT (L/R) jacks to the corresponding
AUDIO IN jacks on the TV set.
OUT IN
A B
DVD player
TV
MCD139B QSG_Eng-37 20/12/06, 17:33 2